معرفی
استان
تهران
شهر
تهران
سمتهای علمی و اجرایی جواد فیض در مجلات و ژورنال‌های معتبر ایران
- فصلنامه مهندسی برق دانشگاه تبریز (هیات تحریریه)
- ماهنامه بین المللی مهندسی (هیات تحریریه)
- فصلنامه روش های هوشمند در صنعت برق (هیات تحریریه)
سمتهای علمی و اجرایی جواد فیض در کنفرانس ها و نشستهای معتبر ایران
- دانشگاه تهران (عضو هیات علمی)
مقالات بین المللی جواد فیض
"Signal-Model-Based Fault Diagnosis in Windings of Synchronous Generator", Institute of Electrical and Electronics Engineers (IEEE), (2023), Vol 19, No 3: 2942-2951
"Cover Image", Institution of Engineering and Technology (IET), (2023), Vol 17, No 3:
"Feasibility Study on the Detection of Turn-to-Turn Fault Severity in the Transformer Winding by Frequency Response Analysis and Numerical Indices", Informa UK Limited, (2023), Vol 51, No 9: 856-870
"Detection of Loss-of-Excitation in Synchronous Machines using Hybrid GMDH Neural Network Intelligent Algorithm in the Presence of UPFC in Power System", Informa UK Limited, (2023), Vol 51, No 10: 972-990
"Equivalent Magnetic Network Modeling of Variable-Reluctance Fractional-Slot V-Shaped Vernier Permanent Magnet Machine Based on Numerical Conformal Mapping", Institute of Electrical and Electronics Engineers (IEEE), (2023), Vol , No : 1-1
"Design of an L-Shaped Array Vernier Permanent Magnet Machine for Unmanned Aerial Vehicle Propulsion using a Schwarz-Christoffel Mapping-based Equivalent Magnetic Network Model", Institute of Electrical and Electronics Engineers (IEEE), (2023), Vol , No : 1-12
"A Comprehensive Inter-Turn Fault Severity Diagnosis Method for Permanent Magnet Synchronous Motors Based on Transformer Neural Networks", Institute of Electrical and Electronics Engineers (IEEE), (2023), Vol , No : 1-11
"Experimental Parameter Estimation of Induction Motor Based on Transient and Steady-State Responses in Synchronous and Rotor Reference Frames", Institute of Electrical and Electronics Engineers (IEEE), (2022), Vol 37, No 1: 145-152
"Cover Image", Institution of Engineering and Technology (IET), (2022), Vol 16, No 3:
"Air-gap eccentricity fault detection, isolation, and estimation for synchronous generators based on eigenvalues analysis", Elsevier BV, (2022), Vol 131, No : 489-500
"A Self-Starting Technique for Two-Phase Switched Reluctance Motors", Institute of Electrical and Electronics Engineers (IEEE), (2022), Vol 37, No 2: 1314-1323
"A Mesh Design Technique for Double Stator Linear PM Vernier Machine Based on Equivalent Magnetic Network Modeling", Institute of Electrical and Electronics Engineers (IEEE), (2022), Vol 37, No 2: 1087-1095
"Resonant Bridgeless Buck PFC Converter With Reduced Components and Dead Angle Elimination", Institute of Electrical and Electronics Engineers (IEEE), (2022), Vol 37, No 8: 9515-9523
"Performance analysis of linear permanent magnet Vernier machine using mixed subdomain and magnetic equivalent circuit techniques including end‐effect", Institution of Engineering and Technology (IET), (2022), Vol 16, No 9: 966-984
"Design and Enhanced Equivalent Magnetic Network Modeling of a Fractional-Slot Spoke-Array Vernier PM Machine with Rotor Flux Barriers", Institute of Electrical and Electronics Engineers (IEEE), (2022), Vol , No : 1-12
"Design of a non‐ferromagnetic spoke array Vernier permanent magnet generator with iron‐bar based on enhanced equivalent magnetic network model", Institution of Engineering and Technology (IET), (2022), Vol 17, No 3: 392-408
"Various parameters influence on field distribution in eccentric disc-type permanent magnet machine based on analytical method", Informa UK Limited, (2021), Vol 18, No 1: 21-30
"An overview of various faults detection methods in synchronous generators", Institution of Engineering and Technology (IET), (2021), Vol 15, No 4: 391-404
"A Simple and Efficient Current-Based Method for Interturn Fault Detection in BLDC Motors", Institute of Electrical and Electronics Engineers (IEEE), (2021), Vol 17, No 4: 2707-2715
"Diagnosis and detection of dynamic eccentricity fault for permanent magnet transverse flux generator", Institution of Engineering and Technology (IET), (2021), Vol 15, No 5: 528-541
"Single stator‐single rotor permanent magnet Vernier machine topologies for direct‐drive applications: Review and case study", Hindawi Limited, (2021), Vol 31, No 12:
"Nonlinear Modeling of a C-Core Connected Two-Phase Switched Reluctance Motor", Institute of Electrical and Electronics Engineers (IEEE), (2021), Vol 36, No 4: 2761-2769
"Featured Cover", Hindawi Limited, (2021), Vol 31, No 12:
"Analysis and detection of turn‐to‐turn short circuit fault in a permanent magnet Vernier generator based on modified winding function", Institution of Engineering and Technology (IET), (2021), Vol 15, No 12: 1630-1647
"Online Model-Based Fault Detection of Synchronous Generators Using Residual Analysis", Institute of Electrical and Electronics Engineers (IEEE), (2021), Vol 9, No : 163697-163706
"Airgap and stray magnetic flux monitoring techniques for fault diagnosis of electrical machines: An overview", Institution of Engineering and Technology (IET), (2021), Vol 16, No 3: 277-299
"Ferrite Permanent Magnets in Electrical Machines: Opportunities and Challenges of a Non-Rare-Earth Alternative", Institute of Electrical and Electronics Engineers (IEEE), (2020), Vol 56, No 3: 1-20
"Impacts of Number of Poles and Slots on Armature Reaction and Performance of Ironless Permanent Magnet Motors", Informa UK Limited, (2020), Vol 48, No 19-20: 1979-1991
"A Novel Structure of Switched Reluctance Machine With Higher Mean Torque and Lower Torque Ripple", Institute of Electrical and Electronics Engineers (IEEE), (2020), Vol 35, No 4: 1859-1867
"Design and performance of linear Vernier generators—The state of the art and case study", Hindawi Limited, (2020), Vol 31, No 3:
"Impacts of ferroresonance and inrush current forces on transformer windings", Institution of Engineering and Technology (IET), (2019), Vol 13, No 7: 914-921
"Analytical calculation of magnetic field in surface-mounted permanent-magnet machines with air-gap eccentricity", Emerald, (2019), Vol 38, No 2: 893-914
"A new hybrid analytical model based on winding function theory for analysis of surface mounted permanent magnet motors", Emerald, (2019), Vol 38, No 2: 745-758
"A Fast Phase Variable <inline-formula>
<tex-math notation="LaTeX">$abc#isilt;/tex-math>
</inline-formula> Model of Brushless PM Motors Under Demagnetization Faults", Institute of Electrical and Electronics Engineers (IEEE), (2019), Vol 66, No 7: 5070-5080
"Investigating the applicability of the finite integration technique for studying the frequency response of the transformer winding", Elsevier BV, (2019), Vol 110, No : 411-418
"Thermal analysis of power transformers under unbalanced supply voltage", Institution of Engineering and Technology (IET), (2019), Vol 13, No 4: 503-512
"Comparison of rotor electrical fault indices owing to inter‐turn short circuit and unbalanced resistance in doubly‐fed induction generator", Institution of Engineering and Technology (IET), (2019), Vol 13, No 2: 235-242
"Robust Design of an Outer Rotor Permanent Magnet Motor Through Six-Sigma Methodology Using Response Surface Surrogate Model", Institute of Electrical and Electronics Engineers (IEEE), (2019), Vol 55, No 10: 1-10
"Diagnosis of interturn fault in stator winding of turbo‐generator", Hindawi Limited, (2019), Vol 29, No 12:
"Turn-to-turn fault monitoring methods in electrical power transformers-State of the art", Hindawi Limited, (2018), Vol 28, No 12: e2644
"A new analytical technique for analysis and detection of air-gap eccentricity fault in surface-mounted permanent-magnet machines", Hindawi Limited, (2018), Vol 29, No 3: e2764
"Performance Analysis of Squirrel-Cage Induction Motors Under Broken Rotor Bar and Stator Inter-Turn Fault Conditions Using Analytical Modeling", Institute of Electrical and Electronics Engineers (IEEE), (2018), Vol 54, No 11: 1-5
"Design of All-Sinusoidal Single Phase On-Line UPS with AVR for Improving Sinusoidal Output Voltage", IEEE, (2018), Vol , No :
"Design of Dual Rotor Axial Flux Permanent Magnet Generators with Ferrite and Rare-Earth Magnets", IEEE, (2018), Vol , No :
"A Novel Linear Stator-PM Vernier Machine With Spoke-Type Magnets", Institute of Electrical and Electronics Engineers (IEEE), (2018), Vol 54, No 11: 1-5
"Analytical Technique for Analysis and Detection of Eccentricity Fault in Surface-Mounted Permanent Magnet Generators Using No-Load Voltage Signature", Informa UK Limited, (2018), Vol 46, No 8: 957-973
"Planetary Gear Fault Detection Based on Mechanical Torque and Stator Current Signatures of a Wound Rotor Induction Generator", Institute of Electrical and Electronics Engineers (IEEE), (2018), Vol 33, No 3: 1072-1085
"Condition Monitoring of Large Electrical Machine under Partial Discharge Fault - A review", IEEE, (2018), Vol , No :
"Online condition monitoring of large synchronous generator under short circuit fault — A review", IEEE, (2018), Vol , No :
"Interturn fault diagnosis in brushless direct current motors — A review", IEEE, (2018), Vol , No :
"Analytic Model for Induction Motors Under Localized Bearing Faults", Institute of Electrical and Electronics Engineers (IEEE), (2018), Vol 33, No 2: 617-626
"Online condition monitoring of large synchronous generator under eccentricity fault", IEEE, (2017), Vol , No :
"Linear permanent magnet generator concepts for direct-drive wave energy converters: A comprehensive review", IEEE, (2017), Vol , No :
"A novel demagnetization fault detection of brushless DC motors based on current time-series features", IEEE, (2017), Vol , No :
"Simulation and experimental analyses of planetary gear tooth defect using electrical and mechanical signatures of wound rotor induction generators", IEEE, (2017), Vol , No :
"A fast, precise and low cost stator inter-turn fault diagnosis technique for wound rotor induction motors based on wavelet transform of rotor current", IEEE, (2017), Vol , No :
"Significance of rotor slots number on induction motor operation under broken bars", IEEE, (2017), Vol , No :
"Uniform demagnetization fault diagnosis in permanent magnet synchronous motors by means of cogging torque analysis", IEEE, (2017), Vol , No :
"Detection of mixed eccentricity fault in doubly‐fed induction generator based on reactive power spectrum", Institution of Engineering and Technology (IET), (2017), Vol 11, No 6: 1076-1084
"An efficient algorithm for fault detection by directional overcurrent relay based on current waveform in distribution systems", IEEE, (2017), Vol , No :
"Finite element analysis of healthy and faulty permanent magnet synchronous motors used in hybrid vehicles", IEEE, (2017), Vol , No :
"Impacts of eccentricity fault on permanent magnet generators for distributed generation", IEEE, (2017), Vol , No :
"Analytic method for eccentricity fault diagnosis in salient-pole synchronous generators", IEEE, (2017), Vol , No :
"Online fault diagnosis of large electrical machines using vibration signal-a review", IEEE, (2017), Vol , No :
"Linear electrical generator topologies for direct‐drive marine wave energy conversion‐ an overview", Institution of Engineering and Technology (IET), (2017), Vol 11, No 9: 1163-1176
"Demagnetization Modeling and Fault Diagnosing Techniques in Permanent Magnet Machines Under Stationary and Nonstationary Conditions: An Overview", Institute of Electrical and Electronics Engineers (IEEE), (2017), Vol 53, No 3: 2772-2785
"Precise Locating of Stator Winding Earth Fault in Large Synchronous Generators", Institute of Electrical and Electronics Engineers (IEEE), (2017), Vol 53, No 3: 3137-3145
"Inductance-based Inter-Turn Fault Detection in Permanent Magnet Synchronous Machine Using Magnetic Equivalent Circuit Model", Informa UK Limited, (2017), Vol 45, No 9: 1016-1030
"A new control method for improving the performance of Modular multilevel converter", IEEE, (2017), Vol , No :
"Eccentricity fault indices in large induction motors an overview", IEEE, (2017), Vol , No :
"Unbalanced Magnetic Force Analysis in Eccentric Surface Permanent-Magnet Motors Using an Improved Conformal Mapping Method", Institute of Electrical and Electronics Engineers (IEEE), (2017), Vol 32, No 1: 146-154
"Comprehensive review on inter‐turn fault indexes in permanent magnet motors", Institution of Engineering and Technology (IET), (2017), Vol 11, No 1: 142-156
"Dissolved gas analysis evaluation in electric power transformers using conventional methods a review", Institute of Electrical and Electronics Engineers (IEEE), (2017), Vol 24, No 2: 1239-1248
"Magnetic equivalent circuit modelling of doubly‐fed induction generator with assessment of rotor inter‐turn short‐circuit fault indices", Institution of Engineering and Technology (IET), (2016), Vol 10, No 9: 1431-1440
"Planetary Gearbox Torsional Vibration Effects on Wound-Rotor Induction Generator Electrical Signatures", Institute of Electrical and Electronics Engineers (IEEE), (2016), Vol 52, No 6: 4770-4780
"Recent progresses in bus-ducts design", Emerald, (2016), Vol 35, No 1: 117-136
"Detection, location, and estimation of severity of interturn faults in power transformers", IEEE, (2016), Vol , No :
"Current-based inter-turn short circuit fault modeling in permanent magnet synchronous machine using magnetic equivalent circuit model", IEEE, (2016), Vol , No :
"Design of a radial flux permanent magnet wind generator with low coercive force magnets", IEEE, (2016), Vol , No :
"Coordinated control of power system stabilizer and FACTS devices for dynamic performance enhancement — State of art", IEEE, (2016), Vol , No :
"Impacts of rotor inter-turn short circuit fault upon performance of wound rotor induction machines", Elsevier BV, (2016), Vol 135, No : 48-58
"Simulation of permanent magnet synchronous motors under short circuit fault", IEEE, (2016), Vol , No :
"Demagnetization Fault Indexes in Permanent Magnet Synchronous Motors—An Overview", Institute of Electrical and Electronics Engineers (IEEE), (2016), Vol 52, No 4: 1-11
"Eccentricity fault detection – From induction machines to DFIG—A review", Elsevier BV, (2016), Vol 55, No : 169-179
"Modeling and analysis of switched reluctance generator using finite element method", Elsevier BV, (2015), Vol 6, No 1: 85-93
"A survey on time and frequency characteristics of induction motors with broken rotor bars in line-start and inverter-fed modes", Elsevier BV, (2015), Vol 54-55, No : 427-456
"Estimation of induction machine inductances using three‐dimensional magnetic equivalent circuit", Institution of Engineering and Technology (IET), (2015), Vol 9, No 2: 117-127
"Impact of rotor winding and stator stepped end core on magnetic force distribution on stator end-winding of turbogenerators", IEEE, (2015), Vol , No :
"Review of eccentricity fault detection techniques in IMs focusing on DFIG", IEEE, (2015), Vol , No :
"Modeling and damping controller design for static var compensator", IEEE, (2015), Vol , No :
"A fast general core loss model for switched reluctance machine", Elsevier BV, (2015), Vol 89, No : 100-105
"Derating of transformers under non‐linear load current and non‐sinusoidal voltage – an overview", Institution of Engineering and Technology (IET), (2015), Vol 9, No 7: 486-495
"Modeling and Diagnosing Eccentricity Fault Using Three-dimensional Magnetic Equivalent Circuit Model of Three-phase Squirrel-cage Induction Motor", Informa UK Limited, (2015), Vol 43, No 11: 1246-1256
"Impact of rotor inter-turn short circuit fault upon performance of a wound rotor induction motor", IEEE, (2015), Vol , No :
"Short-circuit fault diagnosis in permanent magnet synchronous motors- an overview", IEEE, (2015), Vol , No :
"A novel robust design for LPMSM with minimum motor current THD based on improved space vector modulation technique", IEEE, (2015), Vol , No :
"Planetary gearbox torsional vibration effects on wound rotor induction generator electrical signatures", IEEE, (2015), Vol , No :
"Analytical estimation of short circuit axial and radial forces on power transformers windings", Institution of Engineering and Technology (IET), (2014), Vol 8, No 2: 250-260
"Advanced Eccentricity Fault Recognition in Permanent Magnet Synchronous Motors Using Stator Current Signature Analysis", Institute of Electrical and Electronics Engineers (IEEE), (2014), Vol 61, No 4: 2041-2052
"Diagnosing power transformers faults", Allerton Press, (2014), Vol 85, No 12: 785-793
"Conducted electromagnetic interference evaluation of forward converter with symmetric topology and passive filter", Institution of Engineering and Technology (IET), (2014), Vol 7, No 5: 1113-1120
"An Improved Magnetic Equivalent Circuit Method for Evaluation of Different Inductances of a Squirrel-Cage Induction Motor in Healthy and Faulty Conditions", Informa UK Limited, (2014), Vol 34, No 5: 363-379
"Coordinated design of TCSC and PSS controllers using VURPSO and Genetic algorithms for multi-machine power system stability", Springer Science and Business Media LLC, (2014), Vol 13, No 2: 398-409
"Frequency control of isolated WT/PV/SOFC/UC network with new control strategy for improving SOFC dynamic response", Hindawi Limited, (2014), Vol 25, No 9: 1748-1770
"An experimental/simulation investigation to mixed eccentricity fault diagnosis of induction motors under DTC", IEEE, (2014), Vol , No :
"EMI examination of symmetric forward converter", IEEE, (2013), Vol , No :
"Losses Calculation in Line-Start and Inverter-Fed Induction Motors Under Broken Bar Fault", Institute of Electrical and Electronics Engineers (IEEE), (2013), Vol 62, No 1: 140-152
"Performance Analysis of Saturated Induction Motors by Virtual Tests", Institute of Electrical and Electronics Engineers (IEEE), (2012), Vol 55, No 3: 370-377
"A new criterion for rotor broken bar fault diagnosis in line-start and inverter-fed induction motors using Hilbert-Huang transform", IEEE, (2012), Vol , No :
"A survey on condition monitoring and fault diagnosis in line-start and inverter-fed broken bar induction motors", IEEE, (2012), Vol , No :
"Performance analysis of a cylindrical eddy current brake", Institution of Engineering and Technology (IET), (2012), Vol 6, No 9: 661
"Over-current relay implementation assuring fast and secure operation in transient conditions", Elsevier BV, (2012), Vol 91, No : 1-8
"Novel indices for broken rotor bars fault diagnosis in induction motors using wavelet transform", Elsevier BV, (2012), Vol 30, No : 131-145
"Locating Broken Bars in Line-Start and Inverter-Fed Induction Motors Using Modified Winding Function Method", Informa UK Limited, (2012), Vol 32, No 3: 173-192
"Configuration Impacts on Eccentricity Fault Detection in Permanent Magnet Synchronous Motors", Institute of Electrical and Electronics Engineers (IEEE), (2012), Vol 48, No 2: 903-906
"Magnetic field and vibration monitoring in permanent magnet synchronous motors under eccentricity fault", Institution of Engineering and Technology (IET), (2012), Vol 6, No 1: 35
"EMI Analysis and Evaluation of an Improved ZCT Flyback Converter", Institute of Electrical and Electronics Engineers (IEEE), (2011), Vol 26, No 8: 2326-2334
"Electronic Tap-Changers as Custom Power Tools", Springer Berlin Heidelberg, (2011), Vol , No : 109-128
"Electronic Tap-changer for Distribution Transformers", Springer Berlin Heidelberg, (2011), Vol , No :
"Design of Controller of Full-Electronic Tap-Changer for Output Voltage Regulation", Springer Berlin Heidelberg, (2011), Vol , No : 79-108
"Past and Present", Springer Berlin Heidelberg, (2011), Vol , No : 1-36
"Practical Implementation and Experimental Results", Springer Berlin Heidelberg, (2011), Vol , No : 129-169
"Design of Taps Winding Structure and Configuration of Switches in Full-Electronic Tap-Changer", Springer Berlin Heidelberg, (2011), Vol , No : 37-60
"Conclusions and Suggestions", Springer Berlin Heidelberg, (2011), Vol , No : 171-183
"Conducted EMI modeling and reduction in a flyback switched mode power supply", IEEE, (2011), Vol , No :
"Bi-Directional Solid-State Switches in Full-Electronic Tap-Changer", Springer Berlin Heidelberg, (2011), Vol , No : 61-77
"Pattern recognition for broken bars fault diagnosis in induction motors under various supply conditions", Wiley, (2011), Vol 22, No 8: 1176-1190
"Calculating leakage inductances of pancake windings in dry-type Traction transformers", IEEE, (2011), Vol , No :
"Classification and Comparison of EMI Mitigation Techniques in Switching Power Converters - A Review", The Korean Institute of Power Electronics, (2011), Vol 11, No 5: 767-777
"Robust DTC Control of Doubly-Fed Induction Machines Based on Input-Output Feedback Linearization Using Recurrent Neural Networks", The Korean Institute of Power Electronics, (2011), Vol 11, No 5: 719-725
"Stator Inductance Fluctuation of Induction Motor as an Eccentricity Fault Index", Institute of Electrical and Electronics Engineers (IEEE), (2011), Vol 47, No 6: 1775-1785
"Dynamic eccentricity fault diagnosis in round rotor synchronous motors", Elsevier BV, (2011), Vol 52, No 5: 2092-2097
"Diagnosis and Magnetic Field Analysis of Small Power Salient-Pole Synchronous Generator with Static Eccentricity Using Time-Stepping Finite-Element Method", Informa UK Limited, (2011), Vol 31, No 3: 173-191
"A Detailed Analytical Model of a Salient-Pole Synchronous Generator Under Dynamic Eccentricity Fault", Institute of Electrical and Electronics Engineers (IEEE), (2011), Vol 47, No 4: 764-771
"Induction motors performance study under various voltage sags using simulation", IEEE, (2011), Vol , No :
"Comparison of the performance of two direct wave energy conversion systems: Archimedes wave swing and power buoy", Springer Science and Business Media LLC, (2011), Vol 10, No 4: 419-428
"Solid-state tap-changer of transformers: Design, control and implementation", Elsevier BV, (2011), Vol 33, No 2: 210-218
"Time-Stepping Finite Element Analysis of Distribution Transformers Performance under Unbalanced Voltage and Load", Informa UK Limited, (2011), Vol 31, No 1: 63-75
"Design and simulation of UPFC for enhancement of power quality in transmission lines", IEEE, (2010), Vol , No :
"Feature Extraction for Short-Circuit Fault Detection in Permanent-Magnet Synchronous Motors Using Stator-Current Monitoring", Institute of Electrical and Electronics Engineers (IEEE), (2010), Vol 25, No 10: 2673-2682
"Dynamic analysis of mixed eccentricity signatures at various operating points and scrutiny of related indices for induction motors", Institution of Engineering and Technology (IET), (2010), Vol 4, No 1: 1
"Diagnosis and performance analysis of three-phase permanent magnet synchronous motors with static, dynamic and mixed eccentricity", Institution of Engineering and Technology (IET), (2010), Vol 4, No 1: 53
"Operation, modeling, control and applications of static synchronous compensator: A review", IEEE, (2010), Vol , No :
"Analysis of dynamic behavior of switched reluctance motor-design parameters effects", IEEE, (2010), Vol , No :
"Analytical Prediction of Instantaneous Torque and Speed for Induction Motors with Mixed-Eccentricity Fault Using Magnetic-Field Equations", Informa UK Limited, (2010), Vol 30, No 6: 525-540
"Mixed-fault diagnosis in induction motors considering varying load and broken bars location", Elsevier BV, (2010), Vol 51, No 7: 1432-1441
"Inrush Current Modeling in a Single-Phase Transformer", Institute of Electrical and Electronics Engineers (IEEE), (2010), Vol 46, No 2: 578-581
"Detection of Symmetrical Faults by Distance Relays During Power Swings", Institute of Electrical and Electronics Engineers (IEEE), (2010), Vol 25, No 1: 81-87
"Reduction of Cogging Force in Linear Permanent-Magnet Generators", Institute of Electrical and Electronics Engineers (IEEE), (2010), Vol 46, No 1: 135-140
"Experimental Investigation on the Effects of Direct Torque Control Strategy in Eccentricity-related Frequency Components of Line Current of Induction Motors", Informa UK Limited, (2010), Vol 38, No 11: 1285-1298
"A New Technique for Modeling Hysteresis Phenomenon in Soft Magnetic Materials", Informa UK Limited, (2010), Vol 30, No 4: 376-401
"Mixed Derating of Distribution Transformers Under Unbalanced Supply Voltage and Nonlinear Load Conditions Using TSFEM", Institute of Electrical and Electronics Engineers (IEEE), (2010), Vol 25, No 2: 780-789
"Design and simulation of a 250 kW linear permanent magnet generator for wave energy to electric energy conversion in caspian sea", IEEE, (2009), Vol , No :
"Effect of Magnetic Saturation on Static and Mixed Eccentricity Fault Diagnosis in Induction Motor", Institute of Electrical and Electronics Engineers (IEEE), (2009), Vol 45, No 8: 3137-3144
"Temperature Rise Analysis of Switched Reluctance Motors Due to Electromagnetic Losses", Institute of Electrical and Electronics Engineers (IEEE), (2009), Vol 45, No 7: 2927-2934
"Reply to Discussion on “Adaptive Fuzzy System for Discrimination of Fault from Non-fault Switching in Over-current Protection”", Informa UK Limited, (2009), Vol 37, No 6: 695-696
"Criterion Function for Broken-Bar Fault Diagnosis in Induction Motor under Load Variation Using Wavelet Transform", Informa UK Limited, (2009), Vol 29, No 3: 220-234
"Comprehensive Eccentricity Fault Diagnosis in Induction Motors Using Finite Element Method", Institute of Electrical and Electronics Engineers (IEEE), (2009), Vol 45, No 3: 1764-1767
"Design optimization of switched reluctance machines for starter/generator of hybrid electric vehicle by genetic algorithm", Wiley, (2009), Vol 19, No 2: 302-312
"Different indexes for eccentricity faults diagnosis in three-phase squirrel-cage induction motors: A review", Elsevier BV, (2009), Vol 19, No 1: 2-13
"Locating rotor broken bars in induction motors using finite element method", Elsevier BV, (2009), Vol 50, No 1: 125-131
"Finite-Element Transient Analysis of Induction Motors Under Mixed Eccentricity Fault", Institute of Electrical and Electronics Engineers (IEEE), (2008), Vol 44, No 1: 66-74
"Stability analysis and simulation of a single-phase voltage source UPS inverter with two-stage cascade output filter", Wiley, (2008), Vol 18, No 1: 29-49
"Nonlinear feedback control of chaos in synchronous reluctance motor drive systems", IEEE, (2008), Vol , No :
"A New Pattern for Detecting Broken Rotor Bars in Induction Motors During Start-Up", Institute of Electrical and Electronics Engineers (IEEE), (2008), Vol 44, No 12: 4673-4683
"Static Eccentricity Fault Diagnosis in Permanent Magnet Synchronous Motor Using Time Stepping Finite Element Method", Institute of Electrical and Electronics Engineers (IEEE), (2008), Vol 44, No 11: 4297-4300
"Extension to Multiple Coupled Circuit Modeling of Induction Machines to Include Variable Degrees of Saturation Effects", Institute of Electrical and Electronics Engineers (IEEE), (2008), Vol 44, No 11: 4053-4056
"Two-dimensional finite element thermal modeling of an oil-immersed transformer", Wiley, (2008), Vol 18, No 6: 577-594
"Determination of Number of Broken Rotor Bars and Static Eccentricity Degree in Induction Motor under Mixed Fault", Informa UK Limited, (2008), Vol 28, No 6: 433-449
"Diagnosis of Static Eccentricity in Switched Reluctance Motors Based on Mutually Induced Voltages", Institute of Electrical and Electronics Engineers (IEEE), (2008), Vol 44, No 8: 2029-2034
"Three- and Two-Dimensional Finite-Element Computation of Inrush Current and Short-Circuit Electromagnetic Forces on Windings of a Three-Phase Core-Type Power Transformer", Institute of Electrical and Electronics Engineers (IEEE), (2008), Vol 44, No 5: 590-597
"Influence of Vector Control Algorithms on Stator Current Harmonics in Three-phase Squirrel-cage Induction Motors under Mixed Eccentricity Faults", IEEE, (2007), Vol , No :
"Prony-Based Optimal Bayes Fault Classification of Overcurrent Protection", Institute of Electrical and Electronics Engineers (IEEE), (2007), Vol 22, No 3: 1326-1334
"Analysis and Simulation of the AVR System and Parameters Variation Effects", IEEE, (2007), Vol , No :
"Adaptive Fuzzy System for Discrimination of Fault from Non-fault Switching in Over-current Protection", Informa UK Limited, (2007), Vol 35, No 12: 1367-1384
"Signature Analysis of Electrical and Mechanical Signals for Diagnosis of Broken Rotor Bars in an Induction Motor", Informa UK Limited, (2007), Vol 27, No 8: 507-526
"Precise derating of three phase induction motors with unbalanced voltages", Elsevier BV, (2007), Vol 48, No 9: 2579-2586
"Finite Element Transient Analysis of an On-Load Three-Phase Squirrel-Cage Induction Motor with Static Eccentricity", Informa UK Limited, (2007), Vol 27, No 4: 207-227
"Influence of Magnetic Saturation upon Performance of Induction Motor Using Time Stepping Finite Element Method", Informa UK Limited, (2007), Vol 35, No 5: 505-524
"Improved Overcurrent Protection Using Symmetrical Components", Institute of Electrical and Electronics Engineers (IEEE), (2007), Vol 22, No 2: 843-850
"Lumped thermal model for switched reluctance motor applied to mechanical design optimization", Elsevier BV, (2007), Vol 45, No 5-6: 625-638
"New Controller for an Electronic Tap Changer—Part I: Design Procedure and Simulation Results", Institute of Electrical and Electronics Engineers (IEEE), (2007), Vol 22, No 1: 223-229
"New Controller for an Electronic Tap Changer—Part II: Measurement Algorithm and Test Results", Institute of Electrical and Electronics Engineers (IEEE), (2007), Vol 22, No 1: 230-237
"Electromagnetic Modeling of Switched Reluctance Motor Using Finite Element Method", IEEE, (2006), Vol , No :
"Optimal Design of Internal Permanent Magnet Motor for Starter/Generator of Hybrid Electric Vehicle", IEEE, (2006), Vol , No :
"Finite Element Analysis of Switched Reluctance Motor under Dynamic Eccentricity Fault", IEEE, (2006), Vol , No :
"Optimal Excitation Angles of a High Speed Switched Reluctance Generator by Efficiency Maximization", IEEE, (2006), Vol , No :
"Different Faults and Their Diagnosis Techniques in Three-Phase Squirrel-Cage Induction Motors—A Review", Informa UK Limited, (2006), Vol 26, No 7: 543-569
"A Novel Wavelet-Based Algorithm for Discrimination of Internal Faults From Magnetizing Inrush Currents in Power Transformers", Institute of Electrical and Electronics Engineers (IEEE), (2006), Vol 21, No 4: 1989-1996
"Reciprocating flux-concentrated induction generator for free-piston generator", Institute of Electrical and Electronics Engineers (IEEE), (2006), Vol 42, No 9: 2172-2178
"Finite-element analysis of a switched reluctance motor under static eccentricity fault", Institute of Electrical and Electronics Engineers (IEEE), (2006), Vol 42, No 8: 2004-2008
"Differences Between Conventional and Electronic Tap-Changers and Modifications of Controller", Institute of Electrical and Electronics Engineers (IEEE), (2006), Vol 21, No 3: 1342-1349
"Derating of a distribution transformer for non-linear loads", Wiley, (2006), Vol 16, No 2: 189-203
"Influence of unbalanced voltage supply on efficiency of three phase squirrel cage induction motor and economic analysis", Elsevier BV, (2006), Vol 47, No 3: 289-302
"Adaptive performance improvement of switched reluctance motor with two-phase excitation", Wiley, (2006), Vol 16, No 1: 1-13
"Optimal design of an induction motor for an electric vehicle", Wiley, (2006), Vol 16, No 1: 15-33
"Development of analytical models of switched reluctance motor in two-phase excitation mode: extended Miller model", Institute of Electrical and Electronics Engineers (IEEE), (2005), Vol 41, No 6: 2145-2155
"Coupled finite-element/boundary-element analysis of a reciprocating self-excited induction Generator in a harmonic domain", Institute of Electrical and Electronics Engineers (IEEE), (2005), Vol 41, No 11: 4250-4256
"Design of switched reluctance machine for starter/generator of hybrid electric vehicle", Elsevier BV, (2005), Vol 75, No 2-3: 153-160
"A Precise Electromagnetic Modeling and Performance Analysis of a Three-Phase Squirrel-Cage Induction Motor under Mixed Eccentricity Condition", Informa UK Limited, (2004), Vol 24, No 6: 471-489
"Modeling and Simulation of a Salient-Pole Synchronous Generator With Dynamic Eccentricity Using Modified Winding Function Theory", Institute of Electrical and Electronics Engineers (IEEE), (2004), Vol 40, No 3: 1550-1555
"Design and testing of an integrated electronically controlled capacitor for integral and fractional horse power single phase induction motor", Elsevier BV, (2004), Vol 45, No 18-19: 2989-3001
"Influence of Unbalanced Voltage on the Steady-State Performance of a Three-Phase Squirrel-Cage Induction Motor", Institute of Electrical and Electronics Engineers (IEEE), (2004), Vol 19, No 4: 657-662
"New solid-state onload tap-changers topology for distribution transformers", Institute of Electrical and Electronics Engineers (IEEE), (2003), Vol 18, No 1: 136-141
"PSPICE simulation of a capacitor start and triac start single phase induction motor during steady state and transient operations and its experimental verification", Elsevier BV, (2003), Vol 44, No 3: 479-495
"Sensorless direct torque control of induction motors used in electric vehicle", Institute of Electrical and Electronics Engineers (IEEE), (2003), Vol 18, No 1: 1-10
"A novel technique for estimation and control of stator flux of a salient-pole PMSM in DTC method based on MTPF", Institute of Electrical and Electronics Engineers (IEEE), (2003), Vol 50, No 2: 262-271
"Spice-based dynamic analysis of a switched reluctance motor with multiple teeth per stator pole", Institute of Electrical and Electronics Engineers (IEEE), (2002), Vol 38, No 4: 1780-1788
"Torque Ripple Minimization in Switched Reluctance Motor by Optimal Commutation Strategy Using a Novel Reference Torque", Informa UK Limited, (2002), Vol 30, No 7: 769-782
"A complete lumped equivalent circuit of three-phase squirrel-cage induction motors using two-dimensional finite-elements technique", Institute of Electrical and Electronics Engineers (IEEE), (2002), Vol 17, No 3: 363-367
"Extension of winding function theory for nonuniform air gap in electric machinery", Institute of Electrical and Electronics Engineers (IEEE), (2002), Vol 38, No 6: 3654-3657
"Optimal design of three phase induction motors and their comparison with a typical industrial motor", Elsevier BV, (2001), Vol 27, No 2: 133-144
"Different techniques for real time estimation of an induction motor rotor resistance in sensorless direct torque control for electric vehicle", Institute of Electrical and Electronics Engineers (IEEE), (2001), Vol 16, No 1: 104-109
"Harmonic analysis and performance improvement of slip energy recovery induction motor drives", Institute of Electrical and Electronics Engineers (IEEE), (2001), Vol 16, No 3: 410-417
"Comparison of different switching patterns in direct torque control technique of induction motors", Elsevier BV, (2001), Vol 60, No 2: 63-75
"Novel techniques for treating singularity problems in the boundary element method applied to electric field evaluation within the tank of a power transformer", Institute of Electrical and Electronics Engineers (IEEE), (2000), Vol 15, No 2: 592-598
"Performance analysis of fast reclosing transients in induction motors", Institute of Electrical and Electronics Engineers (IEEE), (1999), Vol 14, No 1: 101-107
"PSPICE simulation of single-phase induction motors", Institute of Electrical and Electronics Engineers (IEEE), (1999), Vol 14, No 1: 86-92
"Two-dimensional magnetic field analysis of internal-rotor permanent-magnet motors", Institute of Electrical and Electronics Engineers (IEEE), (1999), Vol 35, No 5: 4232-4237
"OPTIMIZATION OF AN ELECTRONICALLY CONTROLLED CAPACITOR FOR A SINGLE-PHASE INDUCTION MOTOR", Informa UK Limited, (1998), Vol 26, No 10: 1067-1079
"THERMAL MODEL FOR A SWITCHED RELUCTANCE MOTOR OF TEFC DESIGN DURING STEADY AND TRANSIENT OPERATION", Informa UK Limited, (1998), Vol 26, No 1: 77-91
"Automatic finite-element mesh generation using Auto-CAD", Institute of Electrical and Electronics Engineers (IEEE), (1998), Vol 41, No 4: 325-330
"Simulation and analysis of brushless DC motor drives using hysteresis, ramp comparison and predictive current control techniques", Elsevier BV, (1996), Vol 3, No 6: 347-363
"A novel switched reluctance motor with multiple teeth per stator pole and comparison of such motors", Elsevier BV, (1995), Vol 34, No 3: 197-203
"Dynamic analysis of induction motors with saturable inductances", Elsevier BV, (1995), Vol 34, No 3: 205-210
"Optimum design of a three phase squirrel-cage induction motor based on efficiency maximization", Elsevier BV, (1995), Vol 21, No 5: 367-373
"Design computations and performance characteristics prediction for multiple tooth switched reluctance motor", Elsevier BV, (1994), Vol 20, No 3: 243-258
"Core losses estimation in a multiple teeth per stator pole switched reluctance motor", Institute of Electrical and Electronics Engineers (IEEE), (1994), Vol 30, No 2: 189-195
"A software tool for electromagnetic analysis of power system elements using finite difference method", Wiley, (1994), Vol 2, No 4: 245-255
"Three-phase induction motor simulation for teaching purposes", Wiley, (1994), Vol 2, No 1: 71-79
"Teaching aids for electrical machines laboratory", Wiley, (1993), Vol 1, No 5: 455-461
مقالات جواد فیض در کنفرانس های داخلی
بررسی اثر جریان هجومی بر روی سیم پیچ های ترانسفورماتور قدرت
سال 1385
ارائه شده در بیست و یکمین کنفرانس بین المللی برق
طراحی ژنراتور الکتریکی سوئیچ رلوکتانس برای تبدیل انرژی بادی
سال 1383
ارائه شده در نوزدهمین کنفرانس بین المللی برق
تشخیص خطای شکستگی میله های روتور در موتور القایی قفس سنجابی به کمک شبکه عصبی
سال 1383
ارائه شده در نوزدهمین کنفرانس بین المللی برق
THERMAL MODELLING OF SWITCHED RELUCTANCE MOTORS
سال 1383
ارائه شده در نوزدهمین کنفرانس بین المللی برق
انتخاب بهینه زوایای تحریک در ژنراتور سوئیچ رلوکتانس سرعت زیاد
سال 1383
ارائه شده در نوزدهمین کنفرانس بین المللی برق
بررسی رفتار ژنراتور آسنکرون بعد از جدا شدن از شبکه سراسری
سال 1382
ارائه شده در هجدهمین کنفرانس بین المللی برق
سلف های هوایی و روش طراحی یکنوع خاص از آن
سال 1369
ارائه شده در پنجمین کنفرانس بین المللی برق
بررسی خازن های مورد نیاز در ژنراتور القائی سه فاز مستقل با در نظر گرفتن تلفات هسته
سال 1372
ارائه شده در هشتمین کنفرانس بین المللی برق
TRANSIENT OPERATION OF TRANSFORMERS
سال 1374
ارائه شده در دهمین کنفرانس بین المللی برق
کار گذرای ترانسفورماتورها
سال 1374
ارائه شده در دهمین کنفرانس بین المللی برق
آنالیز حالتهای گذرای متورهای القائی و تأثیر آنها بر شبکه های توزیع انرژی الکتریکی
سال 1375
ارائه شده در یازدهمین کنفرانس بین المللی برق
عملکرد ترانسفورمرها با بارهای دینامیک
سال 1376
ارائه شده در دوازدهمین کنفرانس بین المللی برق
کنترل دور موتورهای جریان مستقیم بدون جاروبک به کمک شبکه عصبی مصنوعی
سال 1377
ارائه شده در سیزدهمین کنفرانس بین المللی برق
مدل سازی اشباع CT به کمک EMTP و جبران سازی آن
سال 1378
ارائه شده در پانزدهمین کنفرانس بین المللی برق
محاسبه تلفات وا صلاح مقادیر اسمی ترانسفورماتورهای توزیع تحت بارهای غیرخطی بکمک روش اجزاء محدود
سال 1380
ارائه شده در شانزدهمین کنفرانس بین المللی برق
بررسی اثر اشباع در ژنراتور سنکرون قطب برجسته با در نظر گرفتن مدل حوزه فاز
سال 1380
ارائه شده در شانزدهمین کنفرانس بین المللی برق
محاسبه امپدانس اتصال کوتاه ترانسفورناتور به کمک محاسبه انرژی
سال 1380
ارائه شده در شانزدهمین کنفرانس بین المللی برق
بررسی عملکرد موتور القائی سه فاز روتور قفسه ای تحت شرایط ناهم محوری مرکب
سال 1381
ارائه شده در هفدهمین کنفرانس بین المللی برق
تعاریف نامتعادلی ولتاژ و تأثیر آنها بر تحلیل عملکرد موتور القایی سه فاز
سال 1381
ارائه شده در هفدهمین کنفرانس بین المللی برق
تپ چنجر الکترونیکی ترانسفورماتورهای توزیع و بهبود کیفیت توان
سال 1381
ارائه شده در هفدهمین کنفرانس بین المللی برق
تولید PWM به کمک DTC یک موتور PMS
سال 1384
ارائه شده در سیزدهمین کنفرانس مهندسی برق ایران
تاثیر تغییرات ویسکوزیته روغن ومقاومت سیم پیچی ها در اثر تغییر درجه حرارت بر قابلیت بارگذاری ترانسفورمرهای غوطه ور در روغن
سال 1384
ارائه شده در دهمین کنفرانس سراسری شبکه های توزیع نیروی برق
مدلسازی حرارتی سیم پیچ ترانسفورمر با استفاده از کوپل میدانهای مغناطیسی و حرارتی در محیط المان محدود
سال 1385
ارائه شده در چهاردهمین کنفرانس مهندسی برق ایران
تعیین خازن مینیمم برای راه اندازی ژنراتور القائی خود تحریک شونده
سال 1385
ارائه شده در چهاردهمین کنفرانس مهندسی برق ایران
طراحی بهینه ژنراتور آهنربای دائم بادی برای بار یکسوکننده
سال 1387
ارائه شده در بیست و سومین کنفرانس بین المللی برق
طراحی و شبیه سازی سیستم تبدیل مستقیمAWSبرای تولید برق از انرژی امواج در دریای خزر
سال 1387
ارائه شده در بیست و سومین کنفرانس بین المللی برق
اثر اشباع مغناطیسی بر شاخص نوسان پاندولی در تشخیص عیب اتصال حلقه موتورهای القایی
سال 1390
ارائه شده در بیست و ششمین کنفرانس بین المللی برق
آنالیز امضای جریان خط استاتور برای شناسایی عیب اتصال حلقه موتورهای القائی با در نظر گرفتن اثر اشباع مغناطیسی
سال 1390
ارائه شده در بیست و ششمین کنفرانس بین المللی برق
تعیین تلفات هسته موتور سوئیچ رلوکتانس براساس داده های طراحی
سال 1382
ارائه شده در یازدهمین کنفرانس مهندسی برق
مقایسه دو مدل تحلیلی و مدارمعادل مغناطیسی بهبودیافته درپیش بینی رفتاردینامیکی موتورسوئیچ رلوکتانس با استفاده از نتایج تجربی
سال 1382
ارائه شده در یازدهمین کنفرانس مهندسی برق
Conducted EMI Modeling and Reduction in a Flyback Switched Mode Power Supply
سال 1389
ارائه شده در دومین کنفرانس بین المللی الکترونیک قدرت و سیستم های درایو
اثر اشباع مغناطیسی بر شاخص های غیر تهاجمی عیب اتصال حلقه سیم پیچی استاتور در موتور القایی س هفاز
سال 1391
ارائه شده در بیست و هفتمین کنفرانس بین المللی برق
یک مدار معادل غیرخطی جدید جهت محاسبات اتصال کوتاه و بی باری در ترانسفورماتور چهار سیم پیچه کششی خشک
سال 1391
ارائه شده در بیست و هفتمین کنفرانس بین المللی برق
مقالات جواد فیض در ژورنال های داخلی
آموزش ماشینهای الکتریکی
سال 1378
ارائه شده در فصلنامه آموزش مهندسی ایران
روش های عددی محاسبه میدان ها و پتانسیل الکتریکی
سال 1381
ارائه شده در فصلنامه آموزش مهندسی ایران
آموزش مهندسی مکاترونیک در دانشگاه های کانادا
سال 1384
ارائه شده در فصلنامه آموزش مهندسی ایران
مقایسه دو روش کاهش گشتاور دندانه ای در ماشین تکفاز ۶ قطب مغناطیس دائم با آهن ربای سطحی
سال 1392
ارائه شده در فصلنامه روش های هوشمند در صنعت برق
بهبود سیستم درایو موتور خطی سنکرون مغناطیس دائم مبتنی بر کنترل مستقیم نیروی الکترومغناطیسی با به کار گیری مدولاسیون بردار فضایی
سال 1391
ارائه شده در فصلنامه روش های هوشمند در صنعت برق
تحلیل و شبیه سازی UPS اینورتری منبع ولتاژ تک فاز با فیلتر خروجی مرتبه چهارم
سال 1389
ارائه شده در فصلنامه روش های هوشمند در صنعت برق
Computer Aided Design for Single-Phase Induction Motors Based on a New Gemoetrical Approach
سال 1371
ارائه شده در ماهنامه بین المللی مهندسی
A Design Package for Single Tooth per Stator Pole Switched Reluctance Motors
سال 1373
ارائه شده در ماهنامه بین المللی مهندسی
Moditication Factor for Sizing Equation of Electrical Machines-Single and Three Phase Induction Motors(RESEARCH NOTE)
سال 1373
ارائه شده در ماهنامه بین المللی مهندسی
Simulation of a Variable Reluctance Steping Motor for Sinusoidal and Step Exitations
سال 1375
ارائه شده در ماهنامه بین المللی مهندسی
Analysis of Shaded Pole Induction Motors Considering Asymmetrical Flux Distribution and Saturation Effects
سال 1375
ارائه شده در ماهنامه بین المللی مهندسی
A Review of the Control Techniques for Brushless Direct Current Motors (REVIEW PAPER)
سال 1378
ارائه شده در ماهنامه بین المللی مهندسی
Influence of Operation Conditions Upon the Dynamic Steady State Performance of Switched Reluctance Motor
سال 1378
ارائه شده در ماهنامه بین المللی مهندسی
a Simple Speed Control Technique and Pulsating Torque Elimination Method in a Brushless Dc Motor
سال 1379
ارائه شده در ماهنامه بین المللی مهندسی
A Fast Method for Calculation of Transformers Leakage Reactance Using Energy Technique
سال 1382
ارائه شده در ماهنامه بین المللی مهندسی
Effect of Solid-State on Load Distribution Transformer Tap-Changer on Power Quality Enhancement
سال 1383
ارائه شده در ماهنامه بین المللی مهندسی
یک طرح اصلاح شده جهت هماهنگی رله ها در شبکه های توزیع با در نظر گرفتن معیار پایداری گذرا
سال 1401
ارائه شده در مجله فناوری های نوین مهندسی برق در سیستم انرژی سبز
Review of End Winding Forces Estimation in Synchronous Generators
سال 1401
ارائه شده در فصلنامه سیستم های تبدیل انرژی الکترومکانیکی
آموزش مهندسی در دانشگاه های ایران - گذشته و حال
سال 1373
ارائه شده در فصلنامه رهیافت
چالش های آموزش عالی در رشته های مهندسی
سال 1402
ارائه شده در فصلنامه آموزش مهندسی ایران