سمتهای علمی و اجرایی در دانشگاهها و مراکز علمی کشور
سمتهای علمی و اجرایی در کنفرانس ها و نشستهای معتبر ایران
مقالات بین المللی خارج از کشور
- "Effect of initial microstructure and further thermomechanical processing on microstructural evolution in a Ti–47Al–2Cr alloy", Elsevier BV, (2007), Vol 436, No 1-2: 200-203
- "Study of bipolar pulsed nanocrystalline plasma electrolytic carbonitriding on nanostructure of compound layer for CP-Ti", Springer Science and Business Media LLC, (2008), Vol 5, No 4: 497-503
- "Martensitic Transformation from Ultrafine Grained Austenite Fabricated by ARB in Fe-24Ni-0.3C", Trans Tech Publications, Ltd., (2010), Vol 667-669, No : 361-366
- "Martensite/austenite interfaces in ultrafine grained Fe–Ni–C alloy", Springer Science and Business Media LLC, (2010), Vol 46, No 12: 4216-4220
- "Annealing Behavior of Solution Treated and Aged Al-0.2wt% Sc Deformed by ARB", Trans Tech Publications, Ltd., (2010), Vol 667-669, No : 211-216
- "Texture Evolution in Al–0.2 mass%Sc Alloy during ARB Process and Subsequent Annealing", Japan Institute of Metals, (2012), Vol 53, No 11: 1863-1869
- "Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe–24Ni–0.3C Alloy", Japan Institute of Metals, (2012), Vol 53, No 1: 81-86
- "Microstructural Evolution during ARB Process of Al&ndash;0.2 mass% Sc Alloy Containing Al<sub>3</sub>Sc Precipitates in Starting Structures", Japan Institute of Metals, (2012), Vol 53, No 1: 72-80
- "Investigation of the microstructure and oxidation behavior of Cr-modified aluminide coatings on γ-TiAL alloys", Springer Science and Business Media LLC, (2012), Vol 47, No 4: 470-475
- "Variant selection of martensite transformation from ultrafine-grained austenite in Fe–Ni–C alloy", Elsevier BV, (2013), Vol 577, No : S668-S672
- "Texture development and microstructure evolution in metastable austenitic steel processed by accumulative roll bonding and subsequent annealing", Springer Science and Business Media LLC, (2014), Vol 49, No 19: 6570-6578
- "Microstructure evolution and texture development in a friction stir-processed AISI D2 tool steel", Elsevier BV, (2014), Vol 293, No : 151-159
- "Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding", Elsevier BV, (2015), Vol 77, No : 84-92
- "Microstructural and mechanical properties of AA1100 aluminum processed by multi-axial incremental forging and shearing", Elsevier BV, (2015), Vol 639, No : 705-716
- "Effect of Duty Cycle on Corrosion Resistance and Mechanical Properties of Tertiary Al2O3/ Y2O3/Graphene Pulsed Electrodeposited Ni-based Nano-composite", Elsevier BV, (2015), Vol 11, No : 576-582
- "Development of pseudoelasticity in Fe–10Ni–7Mn (wt%) high strength martensitic steel by intercritical heat treatment and subsequent ageing", Elsevier BV, (2015), Vol 621, No : 52-60
- "Changes in the resistance to corrosion of thermally passivated titanium aluminide during exposure to sodium chloride solution", Springer Science and Business Media LLC, (2013), Vol 41, No 2: 1079-1095
- "An Ultrasound-assisted Method on the Formation of Nanocrystalline Fluorohydroxyapatite Coatings on Titanium Scaffold by Dip Coating Process", Elsevier BV, (2015), Vol 11, No : 137-141
- "Simultaneous improvements of the strength and ductility of fine-grained AA6063 alloy with increasing number of ECAP passes", Elsevier BV, (2016), Vol 669, No : 350-357
- "Optimization of interpass annealing for a minimum recrystallized grain size and further grain refinement towards nanostructured AA6063 during equal channel angular pressing", Elsevier BV, (2016), Vol 112, No : 160-168
- "Observation of pseudoelasticity in a cold rolled Fe–Ni–Mn martensitic steel", Elsevier BV, (2016), Vol 658, No : 86-90
- "Observation austenite memory and significant enhancement of tensile properties during cyclic reverse martensite transformation in a Fe-Ni-C TRIP steel", Elsevier BV, (2016), Vol 676, No : 342-350
- "Inhomogeneity in strain, microstructure and mechanical properties of AA1050 alloy during twist extrusion", Elsevier BV, (2016), Vol 667, No : 349-357
- "Inhomogeneity in microstructure and mechanical properties during twist extrusion", Elsevier BV, (2016), Vol 652, No : 186-191
- "Engineering tensile properties by controlling welding parameters and microstructure in a mild steel processed by friction stir welding", Elsevier BV, (2016), Vol 670, No : 68-74
- "Effect of pre-deformation thermomechanical processing on the development of ultrafine grain structure during equal channel angular extrusion", Elsevier BV, (2016), Vol 89, No : 377-384
- "Dynamic softening mechanism in Ti-13V-11Cr-3Al beta Ti alloy during hot compressive deformation", Elsevier BV, (2016), Vol 665, No : 154-160
- "Characteristics of nano/ultrafine-grained austenitic TRIP steel fabricated by accumulative roll bonding and subsequent annealing", Elsevier BV, (2016), Vol 114, No : 88-96
- "Welding parameters analysis and microstructural evolution of dissimilar joints in Al/Bronze processed by friction stir welding and their effect on engineering tensile behavior", Elsevier BV, (2017), Vol 687, No : 288-297
- "Towards engineering of mechanical properties through stabilization of austenite in ultrafine grained martensite–austenite dual phase steel processed by accumulative roll bonding", Elsevier BV, (2017), Vol 684, No : 120-126
- "Significant enhancement of tensile properties through combination of severe plastic deformation and reverse transformation in an ultrafine/nano grain lath martensitic steel", Elsevier BV, (2017), Vol 686, No : 113-120
- "Recrystallization, precipitation and flow behavior of D3 tool steel under hot working condition", Elsevier BV, (2017), Vol 132, No : 437-447
- "On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography", Springer Science and Business Media LLC, (2017), Vol 48, No 11: 5244-5257
- "Microstructural evolution and fatigue properties of severely deformed AA1050 aluminum alloy", Elsevier BV, (2017), Vol 130, No : 204-210
- "Microstructural characteristics of nano-structured Fe-28.5Ni steel by means of severe plastic deformation", IOP Publishing, (2017), Vol 194, No 1: 012051
- "Improvement of mechanical properties of AA6063 aluminum alloy after equal channel angular pressing by applying a two-stage solution treatment", Elsevier BV, (2017), Vol 687, No : 54-62
- "Effect of pure shear strain on mechanical properties and microstructural evolution", Elsevier BV, (2017), Vol 679, No : 133-142
- "Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire", Wiley, (2017), Vol 88, No 8: 1600423
- "Dependency of annealing behaviour on grain size in Al–TiC composite produced by accumulative roll bonding", Springer Science and Business Media LLC, (2017), Vol 40, No 3: 583-590
- "Correlation between poly-modal grain size and peculiar mechanical properties of pure aluminum deformed by RCSR process", Elsevier BV, (2017), Vol 700, No : 416-424
- "Correlation between microstructure, tensile properties and fatigue life of AA1050 aluminum alloy processed by pure shear extrusion", Elsevier BV, (2017), Vol 679, No : 292-298
- "A comprehensive study of microstructure development and its corresponding tensile properties in nano/ultrafine-grained metastable austenitic steel during accumulative roll bonding (ARB)", Elsevier BV, (2017), Vol 703, No : 196-204
- "The effect of severe plastic deformation and annealing conditions on mechanical properties and restoration phenomena in an ultrafine-grains Fe-28.5%Ni steel", Informa UK Limited, (2018), Vol 98, No 27: 2457-2480
- "Texture analysis and development of ultrafine grained structure during thermo-mechanical treatment in a gamma-TiAl intermetallic", Elsevier BV, (2018), Vol 711, No : 259-267
- "Strengthening of AA5052 aluminum alloy by equal channel angular pressing followed by softening at room temperature", Elsevier BV, (2018), Vol 720, No : 160-168
- "Strain-induced transformation of supersaturated ferrite into nano-sized austenite in a thermomechanically processed duplex stainless steel", Elsevier BV, (2018), Vol 223, No : 5-9
- "Role of cube texture on toughness variation of electric resistance welded steel", Informa UK Limited, (2017), Vol 23, No 5: 387-393
- "Microstructure and mechanical properties development of nano/ultrafine grained AISI 316L austenitic stainless steel prepared by repetitive corrugation and straightening by rolling (RCSR)", IOP Publishing, (2018), Vol 5, No 12: 126519
- "Flow curves and microstructure of K107 tool steel subjected to compression tests at elevated temperatures", Elsevier BV, (2018), Vol 732, No : 78-90
- "Evolution of microstructure and mechanical properties of Fe-24Ni-0.3C TRIP steel during friction stir processing", Elsevier BV, (2018), Vol 718, No : 335-344
- "Estimation of dislocations density and distribution of dislocations during ECAP-Conform process", Author(s), (2018), Vol , No :
- "Effects of deformation routes on the evolution of microstructure, texture and tensile properties of AA5052 aluminum alloy", Elsevier BV, (2018), Vol 732, No : 120-128
- "Effect of pre-deformation cooling rate on the age-hardening response of ultrafine grained AA6063", Elsevier BV, (2018), Vol 713, No : 180-189
- "Effect of high-pressure torsion on the microstructural evolution and mechanical properties of an Fe-10Ni-7Mn (wt. %) lath martensitic steel", Author(s), (2018), Vol , No :
- "A comprehensive investigation of the strengthening effects of dislocations, texture and low and high angle grain boundaries in ultrafine grained AA6063 aluminum alloy", Elsevier BV, (2018), Vol 136, No : 60-68
- "A comparison between routine vs. normalized Cockroft-Latham fracture criteria for prediction of fracture during equal channel angular pressing", Elsevier BV, (2018), Vol 199, No : 721-729
- "On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion", Elsevier BV, (2019), Vol 749, No : 27-34
- "Microstructure and mechanical properties variations of pure aluminum subjected to one pass of ECAP-Conform process", Elsevier BV, (2019), Vol 747, No : 120-129
- "Experimental investigation and phase diagram of CoCrMnNi–Fe system bridging high-entropy alloys and high-alloyed steels", Elsevier BV, (2019), Vol 785, No : 320-327
- "Corrigendum to “On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion” [Mater. Sci. Eng. A 749 (11 March 2019) 27–34]", Elsevier BV, (2019), Vol 767, No : 138213
- "Comprehensive investigation on wear and microstructure development in Al/ti ultrafine grained multi-layered composite produced by Accumulative Roll Bonding (ARB)", IOP Publishing, (2019), Vol 6, No 11: 116572
- "Application of hot forming cold die quenching for facilitating equal channel angular pressing of AA2024 aluminum alloy", Elsevier BV, (2019), Vol 791, No : 265-277
- "A substantial improvement of tensile properties through microstructure engineering in a high Ni-0.2C TRIP steel under severe plastic deformation", Elsevier BV, (2019), Vol 155, No : 109826
- "The effect of cold rolling, double aging and overaging processes on the tensile property and precipitation of AA2024 alloy", Elsevier BV, (2020), Vol 9, No 6: 15475-15485
- "The effect of amount of pre-strain using equal channel angular pressing on softening response of AA5052 alloy", Elsevier BV, (2020), Vol 9, No 3: 6682-6695
- "Superior mechanical properties in high-Ni transformation induced plasticity steels after friction stir welding", Elsevier BV, (2020), Vol 9, No 3: 5431-5441
- "Simulation of peripheral coarse grain structure during hot extrusion of AA7020 aluminum alloy", Elsevier BV, (2020), Vol 57, No : 881-892
- "Regulating tensile properties through bainitic transformation temperature in a hot-rolled δ-TRIP steel", Informa UK Limited, (2019), Vol 36, No 2: 223-232
- "Regulating of tensile properties through microstructure engineering in Fe-Ni-C TRIP steel processed by different strain routes of severe deformation", Elsevier BV, (2020), Vol 9, No 3: 2903-2913
- "Observation of low temperature superplasticity in an ultrafine grained AA6063 alloy", Elsevier BV, (2020), Vol 795, No : 140015
- "Microstructural development and its effects on tensile properties of a high Ni TRIP steel produced by repetitive corrugation and straightening via rolling (RCSR)", Elsevier BV, (2020), Vol 9, No 2: 2279-2288
- "Investigation of joint interface and cracking mechanism of thick cladding of copper on aluminum by equal channel angular pressing (ECAP)", Elsevier BV, (2020), Vol 9, No 3: 3394-3405
- "Effects of pin diameter and number of cycles on microstructure and tensile properties of friction stir fabricated AA1050-Al2O3 nanocomposite", Elsevier BV, (2020), Vol 9, No 3: 4506-4517
- "Effects of hot forming cold die quenching and solution treatment on formability and pressing load during equal channel angular deformation of AA2024 aluminum alloy", Elsevier BV, (2020), Vol 9, No 3: 5599-5609
- "Effects of hot forming cold die quenching and inter-pass solution treatment on the evolution of microstructure and mechanical properties of AA2024 aluminum alloy after equal channel angular pressing", Elsevier BV, (2020), Vol 9, No 2: 1683-1697
- "Achieving extraordinary strength and ductility in TRIP steels through stabilization of austenite up to 99.8 % by friction stir welding", Elsevier BV, (2020), Vol 773, No : 138876
- "The influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel", Elsevier BV, (2021), Vol 10, No : 819-831
- "The influence of aluminum on microstructure, mechanical properties and wear performance of Fe–14%Mn–1.05%C manganese steel", Elsevier BV, (2021), Vol 15, No : 4768-4780
- "The effects of cold rolling and aging conditions on the microstructure and magnetic properties of a semi-hard Fe–Mo–Ni magnetic alloy", Elsevier BV, (2021), Vol 12, No : 521-529
- "The effect of pulse current changes in PCGTAW on microstructural evolution, drastic improvement in mechanical properties, and fracture mode of dissimilar welded joint of AISI 316L-AISI 310S stainless steels", Elsevier BV, (2021), Vol 823, No : 141700
- "The effect of high-pressure torsion on the microstructure and outstanding pseudoelasticity of a ternary Fe–Ni–Mn shape memory alloy", Elsevier BV, (2021), Vol 802, No : 140647
- "The effect of addition of hardystonite on the strength, ductility and corrosion resistance of WE43 magnesium alloy", Elsevier BV, (2021), Vol 13, No : 1855-1865
- "The effect of accumulative roll bonding on the precipitation behavior of a single step artificially aged Al–Ag-Sc alloy", Elsevier BV, (2021), Vol 823, No : 141769
- "TEM study of S' hardening precipitates in the cold rolled and aged AA2024 aluminum alloy: influence on the microstructural evolution, tensile properties & electrical conductivity", Elsevier BV, (2021), Vol 13, No : 798-807
- "Simulation of deformation and fracture initiation during equal channel angular pressing of AZ31 magnesium alloy with covered tube casing", Elsevier BV, (2021), Vol 12, No : 1913-1923
- "Sensitivity to hydrogen induced cracking, and corrosion performance of an API X65 pipeline steel in H2S containing environment: influence of heat treatment and its subsequent microstructural changes", Elsevier BV, (2021), Vol 15, No : 1-16
- "Production of Ti-CNTs surface nanocomposites for biomedical applications by friction stir processing: Microstructure and mechanical properties", Elsevier BV, (2021), Vol 300, No : 130138
- "On the microstructure, texture and mechanical properties through heat treatment in Al–CuO nanocomposite fabricated by Accumulative Roll Bonding (ARB)", Elsevier BV, (2021), Vol 828, No : 142080
- "On the evolution of microstructure and fracture behavior of multilayered copper sheet fabricated by accumulative roll bonding", Elsevier BV, (2021), Vol 10, No : 291-305
- "Nanostructural Evolution and Deformation Mechanisms of Severely Deformed Pure Fe", Springer Science and Business Media LLC, (2020), Vol 27, No 6: 1798-1807
- "Modification of microstructure, hardness, and wear characteristics of an automotive-grade Al-Si alloy after friction stir processing", Informa UK Limited, (2021), Vol 35, No 23: 2696-2709
- "Microstructure, mechanical and electrical properties of dissimilar friction stir welded 2024 aluminum alloy and copper joints", Elsevier BV, (2021), Vol 14, No : 1945-1957
- "Microstructure analysis and observation of peculiar mechanical properties of Al/Cu/Zn/Ni multi-layered composite produced by Accumulative-Roll-Bonding (ARB)", Elsevier BV, (2021), Vol 805, No : 140556
- "Fabrication of Cu-CuG nanocomposites with enhanced mechanical strength and reduced electrical resistivity", Elsevier BV, (2021), Vol 11, No : 650-666
- "Engineering mechanical properties by controlling the microstructure of an Fe–Ni–Mn martensitic steel through pre-cold rolling and subsequent heat treatment", Elsevier BV, (2021), Vol 804, No : 140760
- "Effects of annealing temperature on microstructure and mechanical behavior of conventionally and severely deformed Fe–24Ni steel by accumulative roll bonding", Elsevier BV, (2021), Vol 14, No : 2428-2440
- "Effect of post-deformation annealing on the microstructure and mechanical behavior of an Fe–Ni–Mn steel processed by high-pressure torsion", Elsevier BV, (2021), Vol 15, No : 1537-1546
- "Effect of FSW process parameters on microstructure and mechanical properties of the dissimilar AA2024 Al alloy and 304 stainless steel joints", Elsevier BV, (2021), Vol 814, No : 140981
- "Effect of a trace amount addition of CuO on aluminum sheet processed by accumulative roll bonding with the common roots and rapid annealing", Elsevier BV, (2021), Vol 15, No : 4257-4271
- "Comparing the effect of continuous and pulsed current in the GTAW process of AISI 316L stainless steel welded joint: microstructural evolution, phase equilibrium, mechanical properties and fracture mode", Elsevier BV, (2021), Vol 15, No : 199-212
- "An investigation of hot deformation behavior of Zn–22Al alloy and development of its processing maps during isothermal compression", Elsevier BV, (2021), Vol 14, No : 507-520
- "An experimental and theoretical investigation of the effect of second-phase particles on grain growth during the annealing of hot-rolled AZ61 magnesium alloy", Elsevier BV, (2021), Vol 15, No : 3585-3597
- "A significant toughness enhancement, and microstructural evolution of an electric resistance welded (ERW) microalloyed steel", Elsevier BV, (2021), Vol 15, No : 5776-5786
- "A novel approach to determine residual stress field during FSW of AZ91 Mg alloy using combined smoothed particle hydrodynamics/neuro-fuzzy computations and ultrasonic testing", Elsevier BV, (2021), Vol , No :
- "Unraveling the Relationship between Microstructure and Mechanical Properties of Friction Stir-Welded Copper Joints by Fuzzy Logic Neural Networks", MDPI AG, (2022), Vol 12, No 2: 216
- "The effect of multi-pass friction stir processing on microstructure and mechanical properties of dual-phase brass alloy", Elsevier BV, (2022), Vol 21, No : 1177-1195
- "Strength-ductility synergic enhancement in friction stir welded AA2024 alloy and copper joints: Unravelling the role of Zn interlayer's thickness", Elsevier BV, (2022), Vol 16, No : 251-262
- "Role of geometrically necessary dislocations on mechanical properties of friction stir welded single-phase copper with medium stacking fault energy", Elsevier BV, (2022), Vol 16, No : 194-200
- "On the microstructure and mechanical properties of FeCoCrCuNi high entropy alloy during hot compression", Elsevier BV, (2022), Vol 16, No : 1747-1760
- "On the microstructure and mechanical behaviour of the Cr<sub>2</sub>Fe<sub>2</sub>NiCo<sub>0.67</sub>Cu<sub>0.67</sub>Ti<sub>0.33</sub> alloy during homogenisation", Informa UK Limited, (2022), Vol 38, No 16: 1390-1402
- "Microstructural basis for improved corrosion resistance and mechanical properties of fabricated ultra-fine grained Mg-Akermanite composites", Elsevier BV, (2022), Vol 292, No : 126765
- "Friction stir processing of thick tempered martensitic steels: Correlation between microstructure and mechanical properties", Elsevier BV, (2022), Vol 836, No : 142698
- "Evaluation of the macro/microstructure of Al/Cu/Sn/Ni multi-layered composite produced by accumulative-roll-bonding (ARB) and post-heat treatment", Elsevier BV, (2022), Vol 925, No : 166711
- "Evaluation of texture weakening and microstructural evolution in an Fe–10Ni–7Mn martensitic steel severely deformed by six turns of high-pressure torsion", Elsevier BV, (2022), Vol 851, No : 143660
- "Effect of intercritical annealing and subsequent ageing on the microstructure and mechanical properties of a medium Ni–Mn low carbon steel", Elsevier BV, (2022), Vol 20, No : 3656-3666
- "Effect of concurrent accumulative roll bonding (ARB) process and various heat treatment on the microstructure, texture and mechanical properties of AA1050 sheets", Elsevier BV, (2022), Vol 18, No : 1295-1306
- "Deformation Behavior and Dynamic Recrystallization Mechanism(s) of AMS 5643 Stainless Steel", Springer Science and Business Media LLC, (2022), Vol 11, No 5: 790-800
- "Damage causes and failure analysis of a steam turbine blade made of martensitic stainless steel after 72,000 h of working", Elsevier BV, (2022), Vol 131, No : 105801
- "Correlation between microstructure and shape memory properties in an Fe-9.5Ni-6.5Mn dual phase steel developed by intercritical annealing and subsequent ageing", Elsevier BV, (2022), Vol 21, No : 4537-4547
- "An experimental investigation on the effect of gas tungsten arc welding current modes upon the microstructure, mechanical, and fractography properties of welded joints of two grades of AISI 316L and AISI310S alloy metal sheets", Elsevier BV, (2022), Vol 840, No : 142877
- "A study on microstructure development and mechanical properties of pure copper subjected to severe plastic deformation by the ECAP-Conform process", Elsevier BV, (2022), Vol 21, No : 1614-1629
- "Grain Structure Formation and Texture Modification through Multi-Pass Friction Stir Processing in AlSi10Mg Alloy Produced by Laser Powder Bed Fusion", MDPI AG, (2023), Vol 16, No 3: 944
- "Tribological properties of copper-graphene (CuG) composite fabricated by accumulative roll bonding", Elsevier BV, (2023), Vol 25, No : 4650-4657
- "The effect of multi-pass friction stir processing on microstructure, mechanical properties, and corrosion behavior of WE43-nHA bio-composite", Elsevier BV, (2023), Vol 22, No : 776-794
- "The Astonishing Effect of Si Addition on Low-Cycle Fatigue Life in a Metastable High-Entropy Alloy", Elsevier BV, (2023), Vol , No :
- "The astonishing effect of Si addition on low-cycle fatigue life in a metastable high-entropy alloy", Elsevier BV, (2023), Vol 880, No : 144985
- "Overcoming the strength-ductility trade-off in additive manufactured AlSi10Mg plates by friction stir welding at a low rotational speed", Elsevier BV, (2023), Vol 24, No : 1897-1909
- "On the Normal and Inverse Portevin–Le Chatelier Behavior in Hot Rolled Inconel 617 Superalloy", Elsevier BV, (2023), Vol , No :
- "On the normal and inverse Portevin–Le Chatelier behavior in hot rolled Inconel 617 superalloy", Elsevier BV, (2023), Vol 26, No : 445-461
- "On the impact of using alumina nanoparticles and initial aging on the microstructure and mechanical properties of the AA1050/AA2024 nanostructure composite, created by accumulative roll bonding (ARB) method", Elsevier BV, (2023), Vol 526-527, No : 204895
- "Investigating Fatigue and Corrosion Behavior of We 54 Magnesium Alloy Before and after Immersion in Simulated Body Fluid", Elsevier BV, (2023), Vol , No :
- "Investigating Effect of ECAP Process on Corrosion Behavior of WE43 Magnesium Alloy in Simulated Body Fluid", Springer Science and Business Media LLC, (2023), Vol 29, No 11: 3161-3177
- "Influence of β Precipitated Phase on Mechanical Properties of Equal Channel Angular Pressing-Processed WE43 Alloy", Springer Science and Business Media LLC, (2023), Vol , No :
- "Heat checking as a failure mechanism of dies exposed to thermal cycles: A review", Elsevier BV, (2023), Vol 26, No : 865-895
- "Finite Element Simulation and Experimental Investigation of Hot Forming Cold Die Quenching and Equal Channel Angular Pressing of AA2024 Aluminum Alloy", Springer Science and Business Media LLC, (2022), Vol 32, No 15: 6942-6956
- "Evolution of dynamic recrystallization behavior and simulation of isothermal compression of Zn–22Al alloy", Elsevier BV, (2023), Vol 24, No : 4009-4023
- "Evolution of Dynamic Recrystallization Behavior and Simulation of Isothermal Compression of Zn-22al Alloy", Elsevier BV, (2023), Vol , No :
- "Enhanced in-vitro biodegradation, bioactivity, and mechanical properties of Mg-based biocomposite via addition of calcium-silicate-based bioceramic through friction stir processing as resorbable temporary bone implant", Elsevier BV, (2023), Vol 26, No : 4007-4023
- "Effect of rolling temperature on the occurrence of dynamic strain aging of Inconel 617 superalloy", Elsevier BV, (2023), Vol 871, No : 144879
- "Development of mechanical properties and microstructure for Al–Zn–Mg–Cu alloys through ECAP after optimizing the outer corner angles through FE modeling", Springer Science and Business Media LLC, (2023), Vol 23, No 2:
- "Characteristics of the Cold-Rolled Multi-Phase Cr30Fe30Ni15Co10Cu10Ti5 High-Entropy Alloy", Springer Science and Business Media LLC, (2022), Vol 29, No 5: 1366-1381
مقالات کنفرانسهای داخلی
- بررسی ریزساختار و خواص حافظه داری آلیاژ پایه آهنی با ترکیب شیمیایی (wt.%) Ni -۵ Cr -۷ Si -۵ Mn -۵۵ Fe در شرایط آنیل محلولی ارائه شده در دهمین کنفرانس بین المللی مهندسی مواد و متالورژی (iMat۲۰۲۱) (1400)
- تاثیر فرایند آنیل در منطقه دوفازی و پیرسازی بعدی بر ریزساختار و خواص مکانیکی آلیاژ پایه مارتنزیتی (wt.%)Fe-۱۰Ni-۷Mn ارائه شده در دهمین کنفرانس بین المللی مهندسی مواد و متالورژی (iMat۲۰۲۱) (1400)
- ارزیابی متالورژیکی تاثیر تغییرات جریان پالسی در PCGTAW بر روی تکامل بافت کریستالی فلز جوش در اتصال جوشکاری غیرمشابه فولادهای زنگ نزن AISI ۳۱۶L-AISI ۳۱۰S برای کاربردهای خطوط لوله در پتروپالایشگاه ها ارائه شده در ششمین همایش بین المللی نفت، گاز، پتروشیمی و HSE (1400)
- مروری بر آلیاژهای آنتروپی بالا ارائه شده در شانزدهمین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران (1398)
- Effect of bainitic transformation temperature on the microstructure and mechanical properties of a TRIP Steel ارائه شده در هشتمین کنفرانس و نمایشگاه بینالمللی مهندسی مواد و متالورژی و سیزدهمین همایش ملی مشترک انجمن مهندسی متالورژی و مواد ایران و انجمن ریخته گری ایران (1398)
- خواص مکانیکی و ریزساختار فولاد آستنیتی در اثر اعمال فرآیند جوشکاری اصطکاکی اختلاطی ارائه شده در ششمین کنفرانس بین المللی مهندسی مواد و متالورژی و یازدهمین همایش ملی مشترک انجمن مهندسی متالورژی و مواد ایران و انجمن علمی ریخته گری (1396)
- بررسی ارتباط بین ریزساختار و انحلال ذرات با استحکام درآلیاژ AA6063 فوق ریز دانه حین آنیل ارائه شده در ششمین کنفرانس بین المللی مهندسی مواد و متالورژی و یازدهمین همایش ملی مشترک انجمن مهندسی متالورژی و مواد ایران و انجمن علمی ریخته گری (1396)
- بررسی تغییرات ریزساختار هنگام اعمال کار سرد و عملیات بازگشت در فولاد مارتنزیتی Fe-18Ni ارائه شده در دهمین همایش مشترک و پنجمین کنفرانس بین المللی انجمن مهندسی مواد و متالورژی و انجمن علمی ریخته گری ایران (1395)
- توسعه ریزساختار فولاد دوفازی Fe-24Ni-0.1C درحین تغییر شکل پلاستیکی شدید به روش نورد تجمعی ارائه شده در دهمین همایش مشترک و پنجمین کنفرانس بین المللی انجمن مهندسی مواد و متالورژی و انجمن علمی ریخته گری ایران (1395)
- بررسی تاثیر پرس در کانالهای زاویهدار همسان بر سختی، نوع شکست ومورفولوژی سطح شکست آلیاژ آلومینیوم-منیزیم 5052 ارائه شده در دهمین همایش مشترک و پنجمین کنفرانس بین المللی انجمن مهندسی مواد و متالورژی و انجمن علمی ریخته گری ایران (1395)
- بررسی پارامترهای انفجاری موثر بر کارایی صفحات پرنده در تقابل با جت های سرعت بالا ارائه شده در چهارمین کنفرانس ملی و دومین کنفرانس بین المللی پژوهش های کاربردی در مهندسی برق، مکانیک و مکاترونیک (1395)
- Nanostructured AA6063 alloy using equal channel angular pressing ارائه شده در چهارمین کنفرانس بین المللی آلومینیوم ایران IIAC۲۰۱۶ (1395)
- Microstructural evolution of ultrafine-grained austenite fabricated by severe plastic deformation in Fe-Ni-C alloy ارائه شده در اولین همایش بین المللی و ششمین همایش مشترک انجمن مهندسی متالورژی ایران (1391)
- بررسی پوشش نانو کریستالی کاربونیتریدی به منظور افزایش همزمان مقاومت به سایش و خوردگی یک فولاد ضد زنگ ارائه شده در نهمین سمینار ملی مهندسی سطح و عملیات حرارتی (1387)
- ایجاد پوشش آلومیناید نیکل بر روی آلیاژ γ-TiAl ارائه شده در نهمین سمینار ملی مهندسی سطح و عملیات حرارتی (1387)
- تاثیر دمای پوشش دهی بر زیرساختار پوشش آلومینایدی تشکیل شده بر روی آلیاژ γ- TiAl ارائه شده در نهمین سمینار ملی مهندسی سطح و عملیات حرارتی (1387)
- بررسی رفتار اکسیداسیون پوشش آلومینایدی نفوذی بر روی آلیاژ γ-TiAl ارائه شده در یازدهمین کنگره سالانه انجمن مهندسین متالورژی ایران (1386)
- تاثیر پوشش اولیه Ni بر ریزساختار پوشش آلومینایدی تشکیل شده روی سوپر آلیاژ IN738LC ارائه شده در یازدهمین کنگره سالانه انجمن مهندسین متالورژی ایران (1386)
- اثر سرد کردن بر اندازه، توزیع و مورفولوژی رسوبات Ý در یک سوپر آلیاژ پایه نیکل ارائه شده در یازدهمین کنگره سالانه انجمن مهندسین متالورژی ایران (1386)
- بررسی رفتار اکسیداسیون پوشش آلومینایدی نفوذی برروی آلیاژγ-TiAl ارائه شده در اولین همایش مشترک انجمن مهندسین متالورژی و انجمن ریخته گری ایران (1386)
- تاثیر پوشش ا ولیه Ni برریزساختار پوشش آلومینایدی تشکیل شده روی سوپرآلیاژ IN738LC ارائه شده در اولین همایش مشترک انجمن مهندسین متالورژی و انجمن ریخته گری ایران (1386)
- اثر سرعت سرد کردن براندازه توزیع و مورفولوژی رسوبات g دریک سوپرآلیاژ پایه نیکل ارائه شده در اولین همایش مشترک انجمن مهندسین متالورژی و انجمن ریخته گری ایران (1386)
- بررسی چگونگی تشکیل ساختار ویدمانشتاتن در زمین های از فاز گاما توده ای در طی عملیات حرارتی سیکلی در آلیاژ بین فلزی TiAl حاوی کروم ارائه شده در هفتمین سمینار ملی مهندسی سطح و عملیات حرارتی (1385)
- تاثیر ریزساختار اولیه و فرایند ترمومکانیکی براندازه دانه آلیاژ Ti-47AL-2Cr ارائه شده در نهمین کنگره سالانه انجمن مهندسین متالورژی ایران (1384)
مقالات ژورنالهای تخصصی داخلی
- مروری بر استانداردهای معتبر ملی و بین المللی سامانههای حفاظت کاتدی سازههای موجود در خشکی منتشر شده در ماهنامه اکتشاف و تولید نفت و گاز (1401)
- تاثیر انجام تغییرشکل پلاستیک شدید به روش پیچش تحت فشار بالا بر ریزساختار، خواص مکانیکی و رفتار سودوالاستیسیته فولاد Fe-۱۰Ni-۷Mn (wt.%)آنیل شده در منطقه دو فازی آستنیت-فریت منتشر شده در فصلنامه مهندسی متالورژی (1397)
- مطالعه ریزساختاری و خواص مکانیکی درحین فرایند جوشکاری اصطکاکی اختلاطی در فولاد فریتی کم کربن منتشر شده در فصلنامه مهندسی متالورژی (1396)
- تغییرات ریزساختاری و خواص مکانیکی در اثر کار سرد و دگرگونی مارتنزیتی معکوس در فولاد مارتنزیتی Fe-۱۸Ni منتشر شده در فصلنامه مهندسی متالورژی (1396)
- اثر کار سرد بر رفتار رسوب سختی سوپرآلیاژ Ni Span C۹۰۲ منتشر شده در فصلنامه مهندسی متالورژی (1396)
- ارائه روشی مبتنی بر بازی کاری به منظور ارتقای فرهنگ کارآفرینی سازمانی منتشر شده در فصلنامه انجمن علوم مدیریت ایران (1393)