Improving the performance measurement using overall equipment effectiveness in an automotive industry
محل انتشار: مجله علم مهندسی خودرو، دوره: 8، شماره: 3
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 53
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJAEIU-8-3_004
تاریخ نمایه سازی: 4 دی 1402
چکیده مقاله:
Considering the present business competitive scenario, the automotive industry is under pressure to achieve higher productivity. A high level of performance and quality standard could be achieved through improving the Overall Equipment Effectiveness (OEE) of the equipment in an automotive industry. Thus, the aim of this study is to investigate the performance measurement through OEE theory in an Iranian automotive industry. Data and basic information collected from the Computerized Maintenance Management System (CMMS) of the production assembly lines. In this case study, two different assembly lines such Peugeot and Sports Utility Vehicle (SUV) were studied. The results indicated that the indices such availability rate, performance and quality for Peugeot assembly line obtained an OEE value of ۰.۹۹, ۰.۷۰ and ۰.۳۸, respectively, and, these indices for SUV assembly line obtained as ۰.۹۹, ۰.۳۹ and ۰.۵۳, respectively. Statistical analysis results of net operating time parameter for two assembly lines revealed that there is significant difference in the confidence level of ۵% (P-value < ۰.۰۵). In addition, the OEE index for Peugeot and SUV assembly lines gained ۰.۲۷ and ۰.۲۱ over a period of one year. Consequently, to improve the OEE in the automotive assembly lines, managing the time losses by systematic planning of manufacturing and the implementation of Total Productive Maintenance (TPM) are suggested.
کلیدواژه ها:
نویسندگان
Hamzeh Soltanali
Department of Biosystems Engineering, Ferdowsi University
Abbas Rohani
Department of Biosystems Engineering, Ferdowsi University
Mohammad Tabasizadeh
Department of Biosystems Engineering, Ferdowsi University
Mohammad Hossein Abbaspour- Fard
Department of Biosystems Engineering, Ferdowsi University
Aditya Parida
Professor, Division of Operation and Maintenance Engineering, Luleå University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :