Mathematical Modeling, Simulation of Reaction, and Regeneration Sections of MTO Process: Review
سال انتشار: 1402
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 73
فایل این مقاله در 23 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CCOCDSTS02_004
تاریخ نمایه سازی: 25 دی 1402
چکیده مقاله:
Light olefins, especially ethylene and propylene, are essential intermediates in the petrochemical industry, which are used to produce polyethylene, polypropylene, and other essential products. Olefins can be produced using different processes and raw materials. The method of converting methanol to olefins is one of the processes that has received much attention in recent years. The purpose of this research is to review the mathematical modeling of the reaction and regenerator sections, hydrodynamic simulation, heat transfer, and reaction in the fluidized bed reactor using computational fluid dynamics (CFD), large eddy simulation (LES), for methanol to olefin process (MTO). It is also an examination of effective parameters such as reactor length, reactor flow rate, product distribution, optimal product distribution scenario, and flow rates in a fluidized bed reactor
کلیدواژه ها:
Fluidized bed reactor (FBR) ، Large eddy simulation (LES) ، Methanol to olefin (MTO) ، Computational fluid dynamic (CFD).
نویسندگان
Mahdieh Garmsirian
Petroleum University of Technology, Ahwaz Faculty of Petroleum, Gas Engineering Department
Reza Mosayebbi behbahani
Petroleum University of Technology, Ahwaz Faculty of Petroleum, Gas Engineering Department
Moslem Fattahi
Petroleum University of Technology, Ahwaz Faculty of Petroleum, Gas Engineering Department
Mohammagreza Khosravi nikou
Petroleum University of Technology, Ahwaz Faculty of Petroleum, Gas Engineering Department