The effect of casting diameter on the thermal properties ofa FeNiMoPCB Bulk Glassy Alloy (BGA)
سال انتشار: 1402
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 28
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MCONF07_116
تاریخ نمایه سازی: 19 فروردین 1403
چکیده مقاله:
One method to improve the plasticity of Bulk glassy alloys is producing a composite structure.Increasing the casting diameter together with decreasing the cooling rate can introduce a crystallinephase to the glassy matrix and produce a composite structure. Amongst all glassy alloys, Fe-basedalloys have currently gained attention due to their rather high glass-forming ability as well as theirreasonable price. In this study, the (Fe۱-xNix)۷۷Mo۵P۹C۷.۵B۱.۵ (x=۰.۰۵) glassy alloy was fabricated byinduction melting in an alumina tube and injection casting in a water-circumference copper mold. Xraydiffraction and differential scanning thermal analyses were conducted for ۱ and ۲-mm diameteralloys. According to the analyses, the ۱ mm-diameter alloy has an amorphous structure while the ۲-mm-diameter alloy contains some in-situ nanocrystalline Fe۲NiP phase in the amorphous matrix whichwas formed during cooling from the melt. Using the data from the X-ray diffraction pattern, the size ofthe Fe۲NiP crystallite phase and its volume fraction were estimated to be about ۲۲ nanometers and ۱۸%,respectively. This verifies the fabrication of in-situ amorphous-crystalline nanocomposite of(Fe۰.۹۵Ni۰.۰۵)۷۷Mo۵P۹C۷.۵B۱.۵ alloy.
کلیدواژه ها:
نویسندگان
Ali Amini Rad
PhD student, Faculty of Structural and Materials Engineering, Shiraz University, Shiraz, Iran
Saeed Hasani
Associate Professor, Faculty of Mining and Metallurgy Engineering, Yazd University, Yazd, Iran
Amir Seifoddini
Associate Professor, Faculty of Mining and Metallurgy Engineering, Yazd University, Yazd, Iran