A brief review of the types of adsorbents and the effect of surfacemodification on the adsorption capacity enhancing
محل انتشار: اولین همایش ملی جاذب ها و کاتالیست های صنعتی
سال انتشار: 1402
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 36
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IDCCONF01_048
تاریخ نمایه سازی: 23 اردیبهشت 1403
چکیده مقاله:
Surface adsorption is one of the widely used techniques for water purification as well as used industrialoils. The success of the adsorption process strongly depends on the properties of the adsorbent,especially its surface chemistry. The use of appropriate surface modification methods has a significanteffect on increasing the absorption capacity. In this article, a short review of some types of traditionaland advanced industrial absorbers has been discussed at first. And finally, the effect of modifying theabsorbent surface on improving its performance has been investigated.
کلیدواژه ها:
نویسندگان
k Dinarvandi
Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan.
A Samimi
Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan,
D Mohebbi-Kalhori
Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan.
M Zakeri
Department of Chemical Engineering, Faculty of Engineering, University of Sistan and Baluchestan, Zahedan.
R Zakeralhosseini
Department of Materials and Metallurgical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran