Investigation of Premixed Flame Stabilization and Burning Rates in a Three-Section Porous Ceramic Burner

سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,918

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

CCI02_039

تاریخ نمایه سازی: 17 اسفند 1386

چکیده مقاله:

An experimental investigation of premixed methane/air combustion within a novel porous ceramic burner is described in this paper.The burner is composed of three rectangular porous ceramic layers stacked on each other and insulated around the circumference.The upstream layer is assumed to be the preheat zone,while the others are served as the combustion zones.The operating parameters include fuel/air mixture flow rate and equivalence ratio.The main objectives of this study are documenting the flame stabilization within the burner and determination of operating range.The burner is tested over the range of lean limit (Φ≤0.65).The experimental data demonstrates the advantages of burning a combustible gas inside the porous ceramic burner.The burner shows a great ability to extend the blow off limit at each equivalence ratio.

کلیدواژه ها:

porous burner-flame stabilization-burning rate-blow off

نویسندگان

Ali Moghaddas

M.Sc.student of Mechanical Engineering، Center of Excellence in Energy Conversion,School of Mechanical Engineering,Sharif University of Technology، Tehran,Iran

Yousef Arzhangnia

M.Sc.student of Mechanical Engineering، Center of Excellence in Energy Conversion,School of Mechanical Engineering,Sharif University of Technology، Tehran,Iran

Mohammad Hasan Saidi

Associate professor of Mechanical Engineering، Center of Excellence in Energy Conversion,School of Mechanical Engineering,Sharif University of Technology، Tehran,Iran

Akbar Ghafourian

Associate professor of Mechanical Engineering، Center of Excellence in Energy Conversion,School of Mechanical Engineering,Sharif University of Technology، Tehran,Iran